{{customer_first_name}},
“When They Came to Murder My Wife…
I Grabbed the Weapon with This Lube”

[WRITTEN BY AN OPERATIVE…]

“This is the best weapons lube I have ever used.

We never had such a lube 30 years ago during my first years as a US Army Soldier…

And when my gun would jam after being soaked underwater during Recon missions…

I wish I had this lube.

But when they came to murder my wife- who was the only witness to a violent crime-

I grabbed the weapon with this lube on it because the gun HAD to work to protect her.

It’s the only weapons lube trusted by [REDACTED] here in the wet Pacific Northwest.

Now this isn’t for the hobbyist…

It’s FAR too expensive for plinking cans in the desert.

But when lives depend upon the proper function of your weapon, this is the lube for you. God Bless”

– Richard [REDACTED]

I have used every gun lube and oil on the market,
and nothing beats this…

Because it’s NOT really a “lube”…

It’s NOT an “oil” either.

And I probably shouldn’t have this in my possession…

Because this technology belongs in high-stakes aerospace missions…

We’re talking ZERO FAILURE RATE missions.

I’ve been a firearms owner and to be honest, all gun lubes and oils have “worked.”

Some better than others…

But again, they all “worked.”

But the reason I love this Gun Lube?

It stays where you put it.

I have yet to have this lube “run” after the range, cleaning, or storing.

Now I’m not saying get rid of all your other oils, I’m loyal to the originals too.

I’m just saying that if you have a weapon that HAS TO FIRE when you pull the trigger…

Then this oil is an EXCELLENT addition to your cleaning/maintenance kit.

But that’s not even the most amazing part about this new technology…



Because it’s not actually an oil…

And it’s not a lube…

Yet it’s the ONLY “lubricant” I’ve used that has something called “superlubricity”…

Which means that ALL FRICTION vanishes.

That’s right…

We’re talking about NEAR-ZERO FRICTION…

Or more scientifically…

“A kinetic coefficient of friction less than 0.01.”

So imagine a weapon with near-zero friction?

It would fire SMOOTH. AS. BUTTER.

And it gets better…

GUNS NEVER JAM AGAIN…

Because gun oils break down…

Gum up…

And cause your weapon to jam.

But this isn’t an oil…

This is a nano-layer of pure carbon atoms.

As one military scientist tried explaining…

“A sheet of carbon atoms that all lie in a single plane next to one another. It’s repeating hexagons of these ball-like carbon atoms that extend on in atomic scales for great distances.”

So what that means in layman’s terms?

It’s the Strongest Material
(200x stronger than steel)…

And I’ve seen one calculation that shows if you made a “sheet” of this material…

Which is one atom-layer thick…

You could put an elephant on it, and it wouldn’t break.

It’s the Thinnest Material
(1 Million times thinner than a human hair)…

So for high-precision weapons with impossibly-tight tolerances…

This is the ONLY “lubricant” you should be using.

It’s the Most Impermeable…

Because at a nano-scale, it creates a chicken-wire structure…

Bound by the most powerful force in existence…

Atomic bonds.

So once this layer forms…

Almost NOTHING could break it up…

Which means your weapon is protected from corrosion no matter what.

It has the Highest Thermal Conductivity…

Which prevents early overheating of your weapon during high-intensity use…

Like in a combat situation with a full-auto weapon.

In fact, because this material has such an impressive thermal conductivity…

Researchers had to invent a NEW way to measure thermal conductivity…

Just so they could study this material.

It’s the Most Light Absorbent…

Unlike oils and lubricants, which are shiny and reflective…

Once this material “dries” on your weapon…

It absorbs light better than anything else on our planet.

(This is similar to the material “vantablack” which is now being used to paint the next generation of stealth aircraft)…

And most importantly?

It’s got the Highest Lubricity
(aka Superlubricity)…

Because this material is a 2D material…

Meaning TWO-DIMENSIONAL…

That makes this the thinnest material nature can create…

It’s literally a single layer of carbon.

And without any three-dimensional particles in your weapon…

That means NEAR-ZERO FRICTION…

Which means NEAR-ZERO GUN JAMS caused by friction.

That’s why this material has an impossibly-high flash point…

So no matter how red-hot your weapon gets…

This material will still be there, keeping your parts lubed.

(And for the health conscious, that means you’re not breathing in dangerous “smoke oil” from oils and lubricants)

Now I thought I was the first to use this…

But I found out some of my friends have already caught a sample of this…

Like this comment…

“In a nutshell, I am very impressed with the product… I have tried a lot of different products over the last few years, and had been using Miltec-1. Good initially, but it burns off too fast. But this sample is still the best I’ve found (having tried Lucas Extreme, EWL Lubricant, M-Pro 7, Froglube, Fireclean, etc.)”

And another…

“This is the best lubricant I’ve ever found. A thin layer of this stuff not only lubricates what is coated, it also coats the other contact surfaces. Further, since it is thin, it does not collect as much carbon and dirt as common lubricants. Lastly, it has a high heat tolerance and won’t “cook off” like the others during times of high rates of firing firearms. Great Stuff!”

And yet ANOTHER…

“I work in an industry where the term “revolutionary” is used early and often with new products. Rarely do any of those products end up being remotely revolutionary. But wow, this stuff lives up to the term revolutionary and has exceeded all my expectations. I’ve already used this in the motor oil that has doubled the run time of my cabin generator, and makes my truck drive like it’s on glass, to the slickest, cleanest firearms CLP, and the graphene infused cerakote coatings, this stuff is nothing short of revolutionary. When will you manufacture more of this?”
—

So I thought I was the only one who got this stuff…

Because this isn’t made for the public…

Right now, all manufacturing is geared towards military, aerospace, and industrial usage…

So the samples I got are the “remnants” of a massive batch run for [REDACTED].

And I’m not sure when the next batch will come…

So we bought the rights from the company making it…

Because this stuff ain’t easy to manufacture…

And we needed enough to create a back stock to keep our customers supplied for the long term.

It requires one of the most expensive chemical processes ever invented.

So it takes time, money, and effort to make just an ounce of this unusual liquid…

And that’s why this stuff cost me a pretty penny…

Thousands of dollars, just to get my hands on this remnant batch…

And according to military contracts, I’m probably not supposed to have this either…

Now we have it, and I’m not going to get rid of it.

So now we can produce this world class lubricant without worrying about sourcing it…

They’re about an ounce per bottle…

And for Military purposes, rumor says this stuff sells for about $1,000 per ounce…

But I got this for MUCH less than that (don’t ask me how)…

Now even though this stuff is so expensive…

It’s actually cheaper than most other options…

Because unlike other oils and lubes…

You won’t be wasting this stuff by “reapplying” it every time you shoot, either…

So if I were you?

I’d save this for your daily carry and home defense weapons…

The weapon you’d grab when you need it to work the first time.

So anyways, if you want a bottle…

Then tap the link below, and fill out your information.

If I run out, then you can add your name to the wait list for the next batch…

(This stuff take a hot minute to manufacture)

But of course, the choice is yours.

So if you want a bottle, then click the RED button below.